Neurovate showcaseRidgeline is a fictional business. Sample content, nothing is sent.

Skip to Ridgeline content

Concept projects

Six roofs, drawn in plan.

These are concept projects: invented houses used to show how we think about geometry, profile and detail. They are not completed jobs or real clients, and every drawing is illustrative.

Concept projects

  • RIDGEEAVEN
    Concept P-01

    Long gable on a forested slope

    Single-storey timber-and-stone residence

    Geometry
    Long gable, two planes, deep overhangs
    Profile
    Standing seam, coated steel
    Colour
    Charcoal
    Challenge
    A long unbroken run where oil-canning and heavy needle fall would show immediately.
    Solution
    A heavier gauge over a rigid deck, a ventilated air gap and a continuous valley-free layout that keeps the roof easy to clear.
  • HIGH EDGEEAVEN
    Concept P-02

    Mono-pitch studio

    Modern two-storey studio house

    Geometry
    Single plane, high-side parapet
    Profile
    Batten seam, zinc
    Colour
    Zinc
    Challenge
    A single high edge meets a wall, so water and snow converge on one flashing line.
    Solution
    A detailed head wall flashing with a back dam, concealed gutter and snow rails set where the roof meets the walkway.
  • RIDGEVALLEYN
    Concept P-03

    Cross-gable family home

    Two-storey house with an added wing

    Geometry
    Cross-gable with two valleys
    Profile
    Snap-lock, aluminium
    Colour
    Bronze
    Challenge
    The valleys collect water from two large planes and are the usual first point of failure.
    Solution
    Open, wide valleys formed from a single sheet, wider underlayment overlaps beneath, and panels cut to land cleanly on each side.
  • RIDGEEAVEN
    Concept P-04

    Hipped farmhouse

    Renovated farmhouse with wraparound porch

    Geometry
    Four-plane hip with a short ridge
    Profile
    Standing seam, coated steel
    Colour
    Forest
    Challenge
    Tapering panels at four hips, with a chimney and a vent stack breaking the surface.
    Solution
    Tapered panels laid out from the centre of each plane so the seams stay symmetrical, with cricket and boot flashings on the penetrations.
  • VALLEY AND GUTTEREAVEN
    Concept P-05

    Butterfly roof by the water

    Low-slung coastal house

    Geometry
    Two inward-sloping planes, central valley
    Profile
    Standing seam, aluminium
    Colour
    Bone
    Challenge
    A central gutter carries the whole roof, in salt air, with very little margin for error.
    Solution
    Aluminium throughout, a generously sized welded valley with overflow scuppers, and compatible fasteners at every point.
  • RIDGEEAVEN
    Concept P-06

    Lodge with dormers

    Steep-pitched lodge with three dormers

    Geometry
    Steep gable with eyebrow and gable dormers
    Profile
    Flat-lock, zinc
    Colour
    Slate blue
    Challenge
    Small, steep planes at the dormers where long panels would not fit and snow slides on to a deck.
    Solution
    Flat-lock pans on the dormers that follow their curves, standing seam on the main plane, and snow guards above the entry.

Discuss your roof

Your roof has its own geometry.

Describe the shape in the estimator and we will start from there.